Ronseal Ultimate Protection Decking Stain



  • Ronseal

A water-based, acrylic decking stain and protective treatment for garden decking

CedarCedarCedarCharcoalCharcoalCharcoalCountry OakCountry OakCountry OakDark OakDark OakDark OakMahoganyMahoganyMahoganyMedium OakMedium OakMedium OakMountain GreenMountain GreenMountain GreenSlateSlateSlateStone GreyStone GreyStone GreyTeakTeakTeakWalnutWalnutWalnut
SKU: 3f030f66a813 Categories: , ,

Ronseal Ultimate Protection Decking Stain is fit for a wide range of new and old kitchen decking.

Have scored decking? You’ll typically require twofold the amount.

Weight N/A

Cedar, Charcoal, Country Oak, Dark Oak, Mahogany, Medium Oak, Mountain Green, Slate, Stone Grey, Teak, Walnut


2.5l, 5l


  • Offers unparalleled assurance against pedestrian activity and enduring
  • Gives a dependable, slip safe completion
  • Profound entering equation gives expanded grip and strength
  • Accessible in a scope of alluring, clear hues
  • Low scent

Preparing and Applying


We always suggest that surfaces ought to be dry and clear, and that all hints of residue and soil be eliminated with a brush or vacuum cleaner before applying a wood finish.

The need of sanding and eliminating past finishes from the surface will rely upon the oil, wax or stain utilized (see product instructions for direction on this).


All white and grey products contain titanium zinc which is heavier than the other ingredients in this product. Because of this, it tends to sink to the bottom of the tin and requires a prolonged period of stirring to ensure that it is blended back in with the other ingredients. It is therefore vital that this product is stirred for several minutes, prior and periodically during application, to ensure that any concentrations or titanium zinc sediment at the bottom of the tin are thoroughly intermixed. Failure to stir before and during application may result in an inconsistent colour or finish.

  1. Apply a thin, even film of decking stain with a suitable decking applicator
  2. Work the stain in the direction of the wood grain
  3. Work along the length of 2 or 3 boards at a time
  4. Allow 4 hours between coats dependent on environmental conditions
  5. Apply a second coat as above
  6. Allow 24 hours to dry completely before heavy use

Two coats of Ronseal Ultimate Decking Stain are usually sufficient but this may vary depending on the type of decking timber and its absorbency.


( 0 reviews )