Osmo Wood Wax Finish Intensive



  • Osmo

An adaptable, shaded wood oil for inside wooden surfaces.

3104 Red3104 Red3104 Red3105 Yellow3105 Yellow3105 Yellow3125 Blue3125 Blue3125 Blue3131 Green3131 Green3131 Green3132 Grey Beige3132 Grey Beige3132 Grey Beige3169 Black3169 Black3169 Black3172 Silk3172 Silk3172 Silk3181 Pebble3181 Pebble 3181 Pebble3186 White Matt3186 White Matt3186 White Matt3188 Snow3188 Snow 3188 Snow

Osmo Wood Wax Finish Intensive is amazingly suited for use on all indoor wood surfaces, including wooden divider framing, moldings, radiates, entryways, just as wood in moist conditions, for example, kitchens and restrooms.

It is also appropriate for edge-stuck boards, chipboard and MDF, kids’ toys and as a shaded introduction for wooden deck, just as for re-covering obscured wood surfaces.

Prior to opening the 5ml example sachets, crush the packet a few times to guarantee that the oil and colors inside are altogether blended.

For an alternate scope of clear wood tone hues, consider Osmo Wood Wax Finish Transparent

For a clear finish on thick colorful hardwoods, we suggest Osmo Wood Wax Finish Extra Thin (1101)

Note:Usually one coat creates a clear matte finish while 2 coats deliver a misty finish with a small sheen. This may change depending on the wood type and how it has been sanded. Thus, we generally suggest doing a test zone before beginning any actual work.

The ‘White Matte’ type of this item (code 3186) is intended to create a fully ‘matte’ finish.

Weight N/A

3104 Red, 3105 Yellow, 3125 Blue, 3131 Green, 3132 Grey Beige, 3169 Black, 3172 Silk, 3181 Pebble, 3186 White Matt, 3188 Snow


5ml, 125ml, 375ml, 750ml, 2.5l


  • Amazing protection against fluid spillages, soil, scrapes and abrasion
  • Simple to apply and keep up
  • Doesn’t split, strip, chip or rankle
  • One coat gives a clear finish; two coats give a hazy wood finish
  • Exceptional blend of natural oils and waxes
  • Microporous formula
  • Safe for people, animals and plants when dry
  • High V.O.C

Preparing and Applying


We always suggest that surfaces ought to be dry and clear and that all hints of residue and soil be eliminated with a brush or vacuum cleaner before applying a wood finish.

The need for sanding and eliminating past finishes from the surface will rely upon the oil, wax, or stain utilized (see product instructions for direction on this).




Apply Osmo Wood Wax Finish Intensive thinly to the wood surface, along the wood grain, with an Osmo Soft Tip Brush or wipe, and spread equitably

For a more low-key colored impact, apply thinly with a lint free cotton fabric and after 20 minutes, wipe away neatly and uniformly

For high traffic/wear regions, for example, floors, table tops and work areas, apply just 1 single layer of Wood Wax Finish Intensive, at that point secure it with the harder wearing top layer of clear Osmo Polyx Oil. Then again, try Osmo Polyx Oil Tints White (3040) or Osmo Polyx Oil Raw (3044) for a non-yellowing finish.

For furniture and low wear zones, apply 1 slight coat to accomplish a matt, semi-clear finish, or 2 coats for a more grounded silk matt shade that obstructs the wood grain


There are no reviews yet.

Be the first to review “Osmo Wood Wax Finish Intensive”

Your email address will not be published. Required fields are marked *

( 0 reviews )