Osmo Wood Wax Finish Extra Thin



  • Osmo

A solvent based inside wood oil for woods with a high oil content or tight grain.


Osmo Wood Wax Finish Clear Extra Thin is appropriate for a wide range of hardwood indoor surfaces, including roof paneling and walls, wooden decks, kitchen workshops, and furniture. Because of its water-repulsing characteristics, it is particularly fitting for use in wet conditions, for example, kitchens and restrooms.

Prior to opening the 5ml example sachets, press the pack a few times to guarantee that the oil, wax, and saps inside are altogether blended.

Weight N/A



5ml, 125ml, 750ml, 2.5l


Phenomenal protection from water and fluid spillages

Impervious to earth, scrapes and scraped area

Simple to apply and keep up

Doesn’t split, strip, chip or rankle

Dries to a clear, silk finish

Safe for people, animals and plants once dry

Mild Odour

High VOC

Preparing and Applying


We always suggest that surfaces ought to be dry and clear and that all hints of residue and soil be eliminated with a brush or vacuum cleaner before applying a wood finish.

The need for sanding and eliminating past finishes from the surface will rely upon the oil, wax, or stain utilized (see product instructions for direction on this).




Mix Osmo Wood Wax Finish completely previously and intermittently during application

Apply the first coat equally and thinly along the grain with an Osmo Soft Tip Brush or a lint-free cotton fabric

Let it dry for 30 minutes, at that point eliminate any excess oil with a clean fabric

Give 12 hours for the primary coat to dry before applying the second coat similarly as the first

Apply a second coat as above whenever required

( 0 reviews )