Osmo Polyx Oil is a broadly useful Hardwax-Oil wood finish that is made from natural waxes and oils. Unaffected by dirt, water, cola, wine, and saliva it is microporous and molecularly bonds with the wood, which means it doesn’t break, chip, strip or rankle.
This product can be colored with hues from the Osmo Oil Stain palette, up to 10%, for example, 250ml of Osmo Oil Stain blended in with a 2.5Ltrs of clear Polyx Oil. Special care should be taken when estimating and blending.
It can also be used on numerous kinds of permeable, unpolished, and un-coated interior stone and tile. The oil will darken these substrates and a test sample is suggested before beginning any work.
*Prior to opening the 5ml example sachets, crush the parcel a few times to guarantee that the oil, wax, and saps inside are thoroughly blended.
Preparing and Applying
Preparing:
We always suggest that surfaces ought to be dry and clear and that all hints of residue and soil be eliminated with a brush or vacuum cleaner before applying a wood finish.
The need for sanding and eliminating past finishes from the surface will rely upon the oil, wax, or stain utilized (see product instructions for direction on this).
Applying:
Wooden Floors
Apply first coat equally and thinly along the wood grain with an Osmo Floor Brush along with the Osmo Telescopic Handle for simplicity of use
Eliminate any overflow oil and leave it to dry (8-10 hours)
Gently de-nib the surface
Eliminate all hints of de-nibbing/sanding dust with a vacuum cleaner
Apply a second slight cover and let it fully dry
Cork Floors
Apply the first thin coat with an Osmo Professional Scraper, and for smaller places utilize an Osmo Soft Tip Brush
Polyx-Oil is supposed to quickly seep into the surface
Leave to dry for 24 hours at least
Apply second thin coat
Take off abundance with a cloth right away
Leave to dry for at any rate 24 hours
Reviews
There are no reviews yet.