Osmo Door Oil is manufactured using a mix of regular oils, waxes and tars that are intended to upgrade the appearance and protect a broad scope of softwood and hardwood doors.
Osmo Door Oil 3060 (clear satin) underscores the regular wood grain, giving a ‘wet-look’ finish while Osmo Door Oil 3033 (Raw) is intended to hold the natural, untreated or crude appearance of the Doors.
Note: Always check the maker’s name on the door or with the door maker before applying a finish to affirm compatibility. A few products may not be compatible with certain kinds of door.
Because of the low quantity of white colors in the ‘Crude’ form of this item (3033), a swoon white sheen might be noticeable on hazier, exotic wood types. Therefore a test region is emphatically suggested. For dim and extractive-rich hardwoods, for example, Jatoba, Wenge and Merbau, we suggest utilizing Osmo Wood Wax Finish Extra Thin (1101). This is a dainty oil that is more likely to penetrate the thick wood grain of exotic hardwoods.
Preparing and Applying
Preparing:
We always suggest that surfaces ought to be dry and clear and that all hints of residue and soil be eliminated with a brush or vacuum cleaner before applying a wood finish.
The need for sanding and eliminating past finishes from the surface will rely upon the oil, wax, or stain utilized (see product instructions for direction on this).
Applying:
To see how much oil your decking needs, apply one thin coat, leave to dry, at that point apply a bead of oil in a corner. In the event that the bead of oil splashes into the wood, at that point a further coat can be applied. Rehash this cycle until the drop of oil sits as a dab on the outside of the wood and no longer absorbs to the lumber. This means the wood has assimilated as much oil as it needs
Mix the substance of the tin completely previously and intermittently during use and particularly so with shaded oils
Use an application brush or decking implement to apply the decking oil meagerly and equitably
For fast and simple application, we suggest utilizing the Osmo Floor Brush with the Osmo Telescopic Handle.
If you can treat all sides of the decking sheets including edges and finishes before applying
Wipe off any abundance oil and give it 10 to 12 hours drying time, at that point apply a thin second coat
If a less intensive hue is wanted, apply one layer of shaded decking oil followed with a second layer of clear decking oil, or a layer of clear Osmo Anti Slip Decking Oil (430)
